EQUIPMENT
CO2 WELDING MACHINE
SPATTERLESS MIG WELDING FOR PROFESSIONAL WELDER
MIG-400D is designed for high performance, robust and durable MIG power source with optimal electrical energy efficiency. It is perfect partner for heavy duty welding work where reliability and durability are preferred.
- Full wave bridge rectifier based power source for MIG/MAG welding.
- On the front panel a digital display show the operator a reading of the actual welding current and actual welding voltage for precise voltage and current setting.
- Heavy duty rotary switch for easy voltage selection.
- Front panel push button for Gas check and O.C.V check.
- Separate wire feeder unit.
- Easy plug in connection for torch and control cable.
- Using special design and construction, the spatter in MIG welding has almost eliminated.
- User friendly and very simple to maintain.
- Low maintenance cost.
- Diode based constant voltage power source.
- High power factor, high efficiency and less no load current.
- Class “H” insulation.
- Heavy duty Fan- for AIR FORCE COOLING.
- Wide range of voltage selection switches.
- Available 2T/ 4T mode.
- Servo wire feeder motor for smooth wire feeding.
- Wide range of application Mild steel (MS), Stainless steel (SS), Aluminium and its alloys.
- Low noise and smooth operation.
MODEL | MIG-250D | MIG-400D |
Input Supply | 415V | 415V |
Frequency | 50Hz | 50Hz |
Phase | 3 | 3 |
Welding Current / load voltage |
|
|
60% duty cycle | 250A/ 26V | 400A/ 34V |
100% duty cycle | 195A/23V | 310A/30V |
Open circuit voltage | 16V-36V | 18V-56V |
Static characteristic | CV | CV |
Control method | DIODE | DIODE |
Voltage selection step | 25 | 32 |
Maximum welding current | 250A | 400A |
Cooling | FORCED AIR | FORCED AIR |
Insulatin class | H | H |
DIAMENTION(LXWXH) | 800x450x880 | 800x450x880 |
|
|
|
WIRE FEEDER |
|
|
Input supply | 24V DC | 24V DC |
Wire Speed | 0-20M/MIN | 0-20M/MIN |
Drive Roll | 2 | 2 |
Wire Size(m) | 0.8-1.0 | 0.8-1.2 |
Motor Type | Servo | Servo |
Weight (Kg) | 9 Kg | 9Kg |
|
|
|
MIG TORCH | 24 KD | 36KD |
Max. current capacity | 250A | 400A |
Duty cycle (%) | 60% | 60% |
Cooling type | GAS | GAS |
Length | 3 meter | 3 meter |
End connection | STANDARD | STANDARD |
Wire size (mm) | 0.8-1.0 | 0.8-1.2 |
- A set of Electrode Holder with cable.
- A set of Earth Clamp with cable.
- Wire Feeder Unit Including Welding cable, Remote Cable & Gas Pipe.
- MIG Welding Torch.
- Gas Regulator, Flow Meter and Heater.
| Base Material | Plate Thickness (mm) | Welding Rod Diameter (mm) | Current Range (A) |
| Mild Steel & Stainless Steel | 2.0 – 12.0 | 0.8/1.0/ 1.2 | 60 – 400 |
